Pellet Stove Furnace
Pellet stoves can be used as a second heat source or, with proper venting, as a primary heating option. They are available as freestanding units or as fireplace inserts that give your home the appearance of a traditional wood-burning fireplace.
The auger moves pellets from the hopper to the combustion chamber, where they are burnt and produce heat. Sensors are used to monitor the fire and adjust the rate of operation to ensure the desired temperature of the room.
- Energy Efficiency
Pellet stoves are a renewable, non-toxic fuel made from compressed sawdust as well as other materials. These are usually put in landfills, but they can be used to create a clean and efficient source of heat. pellet stoves small Fireplaces and Stove can help homeowners reduce their energy consumption and reduce greenhouse gas emissions. Many people who use pellet stoves report that they have recouped their initial investment in just a few short years by reducing their heating bills.
Pellets are more dense and compressed than natural wood, which makes them more efficient for burning. They also produce less creosote compared to traditional wood-burning fires. Furthermore, they are packed in plastic bags to keep out moisture and require less frequent cleaning.
Like other heating systems, pellet stoves should be properly sized and vented. A skilled technician can determine the venting requirements and space requirements to ensure the best results.
When the hearth is installed, it is built to size and the vent is inserted through a pre-cut hole your home's siding. The vent can be run through a roof or sidewall depending on your preference and local laws.
After the hearth and vent are finished then the pellet stove can be connected and switched on. Some manufacturers provide a remote control that makes starting and maintaining the fire easy while others come with additional sensors that monitor combustion, airflow flue temperature, pressure. When the system detects it requires more or less pellets, it signals the auger to accelerate or slow down according to the situation.
All stoves have a storage tank that can accommodate between 35 and 130 pounds of pellets. Hopper capacities determine the frequency at which the stove needs to be refilled and larger hoppers allow for longer periods between refills. A grille draws air from the room, passes it through the heat exchanger, and then blows heated air through the living space via convection. A grate or auger distributes the pellets, and a pan underneath collects any unburnt ones, along with the combustion residue.
Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electricity-powered heaters. The electric components that drive their motorized parts require a power source which could cause a problem during a power outage, even though backup systems are readily available, such as batteries and generators.
- Low Maintenance
Pellet stoves are incredibly efficient, but like all major heating appliances, they require some care to ensure they are operating properly. Cleaning regularly the exhaust vent of your stove and stove will prevent the build-up of harmful creosote which could cause a fire, explosion or damage to your home or stove.
A pellet stove uses natural particles that are compressed (such as kernels, nutshells of corn or tiny pieces of scrapwood) made from wood or other substances. An electric-powered auger will feed the pellets from a fuel container into the burner and into the combustion chamber. The speed at which pellets are pumped into the burner is controlled by the thermostat you set. The fire can continue to roar, or it can be modulated lower and even extinguished in accordance with the temperature you set. When the fire goes out, the ash is dropped into an empty ash tin beneath the burner, which can be easily removed and disposed of.
Pellets are made from the byproducts of lumber processing that would otherwise be discarded. They are a renewable resource and emit much less dust into the air than traditional wood-burning stoves, resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals released from pellet stoves is significantly lower than that of modern wood stoves that are EPA-certified.
These stoves aren't required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they can be vented through a wall or another exterior structure. Pellet stoves are equipped with flue ports on the rear or top of the appliance. They are connected to a ventpipe that extends out from the house.
One drawback of pellet stoves is that you must purchase or store enough pellets to last the winter time. Pellet stove owners typically consume three tons of wood pellets per winter, for a price of $200 per ton. The costs can add up but they're less expensive than buying firewood and then hauling it away for a wood-burning stove or fireplace. Be sure to purchase enough pellets so that your stove will work throughout the coldest winter months and that you have the right place to store the pellets (preferably cool, dry and off the ground).
- Reduce carbon footprint
Pellet stoves make use of renewable biomass fuel to generate heat, thus reducing the dependence on fossil fuels that are depleted. This reduces carbon footprints as well as diversifying the sources of energy for homes.
The emissions from pellet stoves are considerably lower than those from woodstoves, even newer EPA-certified ones. Emissions from pellet stoves are also significantly lower than those from gas furnaces. Pellets are made from sawdust, bark, and other wood remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they release less particulates, which could cause respiratory problems and allergies, carcinogens and nitrous dioxide.
The primary difference between the wood stove and the pellet stove is the feed system. Pellet stoves come with hoppers to store the pellets. When the thermostat or sensors suggest that the room needs heating, the auger turns. The pellets are fed into the combustion chamber and burn to generate heat. The combustion chamber is pushed through a heat exchanger, which transfers the heat to a blower and then out into the room. This process results in low emissions and no creosote buildup.
After the hopper has been emptied, the ash is removed by a cyclone and is deposited in an ash bin. The stove also features an air circulator to move the clean, heated air into the living room. Most pellet stoves require minimal maintenance and come with a huge viewing space for you and your family members to relax and enjoy the flames.
The most significant aspect that affects emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality will cause more emissions. When choosing your pellets, ensure that they are certified as meeting certain standards and don't contain other ingredients such as petroleum-based or urea-based substances. Also, look for a manufacturer that has a warranty and will repair or replace any part in case of a problem. If you're looking for an environmentally friendly approach, some states allow homeowners to claim a tax credit for installing pellet stoves. This is a great opportunity to help reduce the initial cost of this kind of stove and make it more affordable to set up.
- Reduced Noise
Pellet stoves emit very little smoke and exhaust in comparison to fireplaces that burn wood. A fan is used to spread heat more evenly across the room. This feature is one of the reasons why pellet stoves require much less maintenance than traditional wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to prevent deterioration, pellet stoves can be cleaned with a metal vacuum cleaner.
Many manufacturers have designed their stoves so that they are simple to set up and operate, as well as maintain. The stoves are available in various styles that are designed to match the decor of your home. Certain models come with an app for WIFI, a remote control and thermostat that can be programmed.
Most pellet stoves have a large fuel hopper that can contain between 35 and 130 pounds of pellets. The pellets are then delivered into the combustion chamber via an auger. The speed at which pellets are delivered to the burner determines how hot the fire is and the heat output. The hopper may be filled with hardwood pellets, composed of dense wood species such as oak and hickory, or softwood pellets. Many stoves can even make use of alternative biomass pellets like those made from switchgrass or corn which are environmentally friendly alternatives.
Since pellet stoves burn an environmentally friendly fuel, they produce far less smoke than traditional wood-burning fireplaces and require less maintenance. They don't require chimneys, making them a better choice for retrofits or new construction.
Pellet stoves do not require regular cleaning of creosote and other chemicals like wood stoves. They only need periodic inspections to ensure the proper operation and maintenance. Depending on the model, this may include regular inspections and cleaning of the accumulation of the ash or “clinker,” as well as the fan and motor. Your appliance dealer can provide the correct procedures for the specific model and brand. They can also provide details regarding safety and storage, and assist you in locating the appropriate fuel for your stove.